OVERGRIPS · OEM & BULK SUPPLY
Compare tacky, dry, mild-tack and raised-ridge overgrips by surface feel, structure and thickness. An overgrip wraps over an existing base grip. Open a model for its listed dimensions, then check the installed feel on your intended handle.
OEM & private label · Model-specific specifications · Custom packaging
Two ways to work with us
Choose a catalogue model or bring us your brief.
FIND YOUR STARTING POINT
An overgrip wraps over an existing base grip. Surface feel, structure and thickness are separate decisions: compare them on the intended handle before approving a sample.
Compare tacky models for a more adhesive hand-feel, or mild-tack models for a lighter surface grab. Softness and tack level can vary independently.
Start with the dry-feel models when a sticky surface is not the brief. Evaluate the grip with the sweat conditions, wrapping tension and overlap your customers use.
Raised-ridge, perforated and gradient options add distinct surface and handle profiles. Check the installed feel and pattern orientation alongside the flat material sample.
SHORTLIST BY YOUR PROJECT
Start with the hand-feel you want to sell, then compare thickness and structure. These are starting combinations for evaluation, rather than a performance ranking.
Compare three surface families on the same base grip. Specify the exact thickness for each sample so that the comparison is about tack level rather than handle build-up.
Review on the sample: Record initial surface grab, hand repositioning and feel after use. Keep wrapping tension and overlap consistent.
This family lists 0.50, 0.60 and 0.70 mm options, with a 1200 mm length and 25–28 mm width range. Request the individual thicknesses when building a coordinated retail line.
Review on the sample: Approve the thickness, width and pack label together. The combined catalogue entry covers three model references.
OG-K01 is a perforated PU keel design; OG-DB01 uses PU/EVA with a gradient dragon-bone pattern. Both list approximately 1100 × 25 × 0.7 mm. Use OG-T02 as a flat-wrap comparison with a matched sample thickness.
Review on the sample: Compare the installed ridge position, seam, grip circumference and logo visibility. A decorative pattern is a separate choice from tack level.
SPECIFICATIONS AT A GLANCE
Use the listed dimensions as a starting point. Confirm the exact variant and approved sample before placing a production order.
| Model | Feel / material | Listed dimensions | Surface / available finishes | Next step |
|---|---|---|---|---|
| OG-DB01 | PU / EVA | 1100 × 25 × 0.7 mm | Gradient, raised dragon-bone pattern | Compare sample |
| OG-K01 | PU | 1100 × 25 × 0.7 mm | Perforated, raised keel ridge | Compare sample |
| OG-T01 | Soft Tacky | L 1200 mm · W 25 - 28 mm · T 0.4 - 0.8 mm | Smooth (Custom perforated available for enhanced breathability) | Compare sample |
| OG-T03/OG-T04/OG-T05 | Tacky | L 1200 mm · W 25 - 28 mm · T 0.50 mm / 0.60 mm / 0.70 mm | Smooth (Custom perforated available for enhanced breathability) | Compare sample |
| OG-D01 | Dry | L 1200 mm · W 25 - 28 mm · T 0.4 - 0.8 mm | Smooth (Custom perforated available for enhanced breathability) | Compare sample |
| OG-C01 | Soft | L 1200 mm · W 25 - 28 mm · T 0.4 - 0.8 mm | Smooth (Custom perforated available for enhanced breathability) | Compare sample |
| OG-MT01/OG-MT02 | Mild Tacky | L 1200 mm · W 25 - 28 mm · T 0.50 mm / 0.60 mm | Smooth (Custom perforated available for enhanced breathability) | Compare sample |
| OG-WT01 | Wet Tacky | L 1200 mm · W 25 - 28 mm · T 0.4 - 0.8 mm | Smooth (Custom perforated available for enhanced breathability) | Compare sample |
| OG-T02 | Tacky | L 1200 mm · W 25 - 28 mm · T 0.4 - 0.8 mm | Smooth (Custom perforated available for enhanced breathability) | Compare sample |
| OG-MT03 | Mild Tacky | L 1200 mm · W 25 - 28 mm · T 0.4 - 0.8 mm | Smooth (Custom perforated available for enhanced breathability) | Compare sample |
| OG-D02 | Dry | L 1200 mm · W 25 - 28 mm · T 0.4 - 0.8 mm | Sanded (custom embossed or perforated patterns available) | Compare sample |
| OG-D03 | Dry | L 1200 mm · W 25 - 28 mm · T 0.4 - 0.8 mm | Sanded (custom embossed or perforated patterns available) | Compare sample |
| OG-T06 | Tacky | L 1200 mm · W 25 - 28 mm · T 0.40-0.80 mm | Custom colors and patterns | Compare sample |
| OG-F01 | Firm / Dry-ish | L 1200 mm · W 25 - 28 mm · T 0.4 - 0.8 mm | Custom colors and patterns | Compare sample |
| OG-T07 | Soft, Elastic & Tacky | L 1200 mm · W 25 - 28 mm · T 0.4 - 0.8 mm | Custom colors and patterns | Compare sample |
| OG-K02 | Material to confirm | Confirm strip dimensions with your frame reference | Custom colors and patterns | Compare sample |
16 MODELS TO EXPLORE
Open a model for its current dimensions, surface description and gallery. The selection below includes the tacky, dry, mild-tack and other overgrip series.
OG-DB01
PU/EVA dragon-bone overgrip with a gradient finish, anti-slip and sweat-absorbent. 1100 × 25 × 0.7 mm; nine colors and custom logo available.
OG-K01
Perforated PU keel overgrip with a raised ridge for breathability and anti-slip control. 1100 × 25 × 0.7 mm, ten colors, custom logo available.
OG-T01
A soft tacky overgrip with strong surface grip, reliable anti-slip performance, and sweat absorption for secure racket handling.
OG-T03/OG-T04/OG-T05
A durable tacky overgrip with reliable anti-slip and sweat absorption performance, available in three thickness options.
OG-D01
An ultra-thin dry overgrip with high sweat absorption and a clean, non-tacky feel for lightweight, direct handling.
OG-C01
A soft, cushioned overgrip designed for comfortable handling, with reliable vibration damping, sweat absorption, and non-slip performance.
OG-MT01/OG-MT02
A mildly tacky overgrip offering subtle surface grip and natural racket feedback for balanced, controlled handling.
OG-WT01
Custom 0.4 - 0.8 mm wet tacky overgrip with high sweat absorption, soft elasticity and secure grip. Designed for custom racket grip programs and bulk orders.
OG-T02
Custom 0.4 - 0.8 mm tacky overgrip with a soft feel and balanced tackiness for a comfortable, controlled grip during play.
OG-MT03
Custom 0.4 - 0.8 mm soft mild tacky overgrip with anti-slip and sweat absorption performance for a comfortable, secure grip during play.
OG-D02
0.4–0.8 mm sanded dry overgrip for humid climates and shared club rackets. Quick sweat absorption, a clean non-tacky feel and a 1200 mm length.
OG-D03
Durable 0.4–0.8 mm sanded dry overgrip for clubs, training centers and high-volume replacement programs. 1200 mm length, OEM colors and packaging.
OG-T06
A high-tack 0.60 mm overgrip with a durable surface, sweat absorption and anti-slip control for aggressive play.
OG-F01
A firm, dry-feel overgrip with a crisp hand feel, sweat absorption and reliable anti-slip performance for stable handling.
OG-T07
A soft, elastic 0.60 mm tacky overgrip with a responsive feel, anti-slip control and sweat absorption for cushioned handling.
OG-K02
A ribbed badminton grip concept with multiple color options and customizable logo branding, cut length and private-label packaging.
SAMPLE REVIEW
A small change in thickness, stretch or overlap can change the finished grip size. Use a consistent wrapping method when comparing models.
Sample availability, charges and shipping are confirmed before dispatch. Confirm the selected models, sample quantity and any charges before dispatch.
OEM & PRIVATE LABEL
Discuss colors, logo artwork, surface options, cut length and packaging with the product brief. Availability and order quantities are confirmed for the selected model and customization.
Selected model or reference sample, intended sport, target dimensions, estimated order quantity, colors, logo artwork, packaging and delivery destination.
CUSTOMIZATION BRIEF
Multiple colors, custom logos, lengths and packaging can be discussed. Available methods, dimensions and minimum quantities depend on the selected model and finish.
| Decision | What to send | What to approve |
|---|---|---|
| Feel & surface | Name the reference model and whether you want tacky, mild-tack, dry, perforated or raised-ridge construction. | Confirm the selected construction on a physical sample; a color change alone does not define the feel. |
| Dimensions | Give the target length, width and thickness, plus the intended handle or a reference wrap. | Most flat OG entries list 1200 mm length; the keel and dragon-bone entries list 1100 mm. Confirm any change before packing artwork. |
| Colors & logo | Share color references, vector artwork and the desired logo position on the wrap, band or pack. | Review the logo after wrapping and confirm the suitable branding method for the surface. |
| Pack format | Specify pieces per pack, color assortment, label text and destination-market barcode requirements. | Approve one complete packed sample, including the model and thickness printed on the label. |
BUYER QUESTIONS
An overgrip is an additional wrap over a base grip. A replacement grip forms the base layer directly on the racket handle. Choose the construction first, then compare feel and dimensions.
Yes. Choose a primary model in the sample form and list any additional models you would like to compare. We will confirm availability and the sample arrangement.
Logo, color, length and packaging requirements can be discussed for OEM and private-label orders. The available method depends on the selected material and finish.
Both list the same 0.4–0.8 mm sanded construction and 1200 mm length. OG-D02 is positioned for humid climates and shared club rackets; OG-D03 is positioned for club and training programs with high replacement frequency. Choose by intended use and order profile, then confirm both on the same handle.
It describes the listed series range. State the exact thickness you want quoted and sampled; the production specification should identify one approved thickness or separately identified variants.
SELECTION GUIDES
